SATA to USB adapter up to 6Gbps…

— Compliant to Serial ATA Specification Revision 3.1 — Supports external SPI flash for firmware upgrade — Compliant to Universal Serial Bus Specification Revision 2.0 < br />— Mass Storage Class Bulk-Only Transport (BOT) As you can see, it connects to a computer and phone without any problems. Blue voltage (power) and red access (access) to the disk. VIA Lab’s VL711 is a high-performance, low-power, single-chip USB 3.0 bridge controller with SATA 6Gb/s designed for next-generation external storage devices connecting hard disk drive (HDD), solid state drive (SSD) . There are probably better ones, but I chose this one. — Compliant to Universal Serial Bus Specification Revision 1.0
Speed ​​of SSD (256GB) connected via this adapter: — Integrated in-house Super-Speed ​​PHY and USB 2.0 PHYSerial ATA 6Gb/s, 3Gb/s and 1.5Gb/s The adapter works on the controller VL711 – Low Power Super Speed ​​USB 3.0 to SATA 6Gb/s Bridge Controller

SATA to USB adapter up to 6Gbps (2.5 inch external SSD and HDD hard drive)

— Supports EEPROM for customized PID/VID/SN…Software
Apart from Bulk-Only Transport, the VL711 also supports USB Attached SCSI Protocol (UASP), which allows mass storage device command queuing and out-of-order data transfer to further improve read/write performance. Brought to connect any standard 2.5" SATA SSD or HDD to a computer via USB 3.0 ports. — MMC-2 command pass-through to ATAPI There were no problems connecting and opening files. Conclusion: Cheap and fast adapter. — Supports multiple LUNFast 8051 Macro cell 80C32-Compatible Microcontroller — 5.0V to 1.2V switching DC-DCGPIOs for Special Function Usage There are two LED indicators on the top of the adapter. — 5.0V to 3.3V LDO I can’t single out anything special as a plus or a minus. — Supports Microsoft Windows 8,Windows 7, Vista, XP, 2003 , 2000, and ME Only available for laptop hard drive and SSD, not available for 3.5" desktop hard drive. — 2 dedicated BUSY /POWER LED indicatorsMisc USB 2.0 and Type C are also available. — 7 GPIOs in QFN48 and QFN44 for special customer usage — Supports Mac OS 10.X
Speed ​​of HDD (500GB) connected via this adapter: — RBC command conversion for ATA device
Integrated with all the necessary linear and switching voltage regulators, the highly integrated VL711 works great with a single 5V USB bus power input, reducing the cost. — USB Attached SCSI Protocol (UASP) for streaming — Integrated in-house SATA 6Gb/s PHY I chose a USB 3.0 adapter. Supporting Bulk-Only Transport (BOT) USB storage class, VL711 based devices can run Windows 10, Windows 8, Windows 7, Vista, XP, 2003/2000/ME, Mac OS X and https://jiji.com.et/cars/kia-sportage-2014 various Linux kernels without additional drivers. Its built-in internal USB PHY allows the VL711 to operate in USB Super-Speed, High-Speed ​​and Full-Speed ​​modes. — Supports various Linux kernels Super-Speed ​​USB (5Gb/s) and High-Speed ​​USB (480Mb/s) Its built-in SATA 6Gb/s host controller can
work with all SATA-based storage devices and can automatically connect at SATA 6Gb/s, SATA 3Gb/s, or SATA 1.5Gb/s.
It just does what it’s supposed to do reliably. — Supports 48-bit LBA — Supports devi ce power down function
As soon as I received this adapter, I tested it: Let’s see what’s inside the adapter itself, which allows it to quickly connect: Tried SSD from 120 to 500 GB and HDD from 500 GB. — Standard 1T 8051 instruction setBuilt-in Voltage Regulators This type of adapter can always be useful and worth buying, especially if you compare its price and